In-vehicle networking, including automotive Ethernet, data buses and vehicle network architecture.
Noregon launches CAN Mentor vehicle network diagnostic software
Noregon has launched CAN Mentor, a diagnostic application that works with its DLA+ 3.0 XBT adapter to identify vehicle CAN communication, voltage and resistance faults and guide technicians towards the affected area.
Automotive Ethernet and CAN Bus: Architectural Differences
OEMs have been adopting Automotive Ethernet as a high-bandwidth backbone and have retained CAN and CAN FD for deterministic local control; vehicle architectures have been shifting towards zonal compute, TSN-enabled deterministic Ethernet and IP-based service-oriented platforms.
ACEA and COVESA advance VSS for trucks and buses
ACEA and truck and bus OEMs have collaborated with COVESA to integrate FMS v5 into the Vehicle Signal Specification, have defined the data structure and repository branch, and have targeted an initial specification release for COVESA’s October meeting.
Ethernovia launches HSB networking board for NVIDIA Holoscan
Ethernovia has launched an HSB networking board for NVIDIA Holoscan, enabling direct Ethernet sensor-to-GPU transfer with ultra-low latency, Omniverse integration for real-time simulation, and a software-defined, scalable architecture aimed at accelerating edge AI deployment.
Renesas launches 28 nm automotive MCU for ASIL D and zonal architectures
Renesas has launched the 28 nm RH850/U2C automotive MCU for chassis, safety, battery-management and motor-control applications. The device supports ASIL D, cybersecurity requirements and interfaces including automotive Ethernet, CAN-XL and I3C to support migration to zonal vehicle architectures.
Renesas launches 28 nm automotive MCU for ASIL D vehicle systems
Renesas has launched the 28 nm RH850/U2C automotive MCU for chassis, safety, battery-management and motor-control applications. It supports zonal architectures, multiple automotive networking interfaces, ASIL D functional safety and ISO/SAE 21434 cybersecurity requirements.
Arrow launches E/E architecture initiative
Arrow Electronics has introduced an E/E architecture initiative and online research hub to support OEMs and suppliers with integrated compute platforms, software and supply‑chain services, and has aggregated hardware, software and engineering expertise to address vehicle E/E complexity.
Ethernovia raises $90m for Ethernet AI networking chips
Ethernovia raised more than $90m in a Series B to develop Ethernet packet processors and networking chips for autonomous vehicles, robotics and industrial systems and expand product and customer engagements.
RemotiveLabs launches virtual integration platform
RemotiveLabs introduced RemotiveTopology, a virtual vehicle-integration platform that accelerates late-stage software–hardware testing, supports standard vehicle networks and offers an open-source model for virtualised validation.
Keysight to showcase connected-vehicle and cybersecurity solutions at CES 2026
Keysight will demonstrate automotive Ethernet, V2X simulation, connected-vehicle cybersecurity and AI-system validation tools at CES 2026 in Las Vegas from 6–9 January 2026.
Vector launches CANape 24 for ECU and ADAS validation
Vector’s CANape 24 adds ASAM CMP and legacy network support, real‑time ADAS algorithm validation, integrated logging with vLoggerControlRoom, and 100 GB cloud storage with secure Team Services exchange.
Microchip launches 10BASE-T1S endpoints for zonal Ethernet
Microchip has introduced LAN866x 10BASE-T1S endpoints enabling software-less Ethernet-to-local-interface translation, supporting multidrop zonal architectures to reduce cabling, integration complexity and per-node hardware.
NXP Finalises Acquisitions to Enhance Automotive and Edge AI Capabilities
NXP Semiconductors completed acquisitions of Aviva Links and Kinara, expanding its automotive connectivity and edge AI offerings to strengthen its position in automotive and IoT markets.
Sony unveils automotive CMOS sensor with integrated MIPI A-PHY interface
Sony’s IMX 828 automotive CMOS sensor integrates a MIPI A-PHY interface, removing the need for a separate serializer. The 8.34MP sensor offers HDR of up to 150dB, low-power parking surveillance and optional ISO/SAE 21434 cybersecurity features, with samples planned for November 2025.
Metis launches isolated eight-channel thermocouple-to-CAN module
Metis Engineering has launched an isolated eight-channel thermocouple-to-CAN module for high-precision temperature monitoring in automotive, battery, power-electronics and industrial applications. It supports multiple thermocouple types, fault detection and integration with existing CAN networks.
Microchip and AVIVA Links Achieve ASA-ML Chipset Interoperability
Microchip and AVIVA Links demonstrated interoperability of ASA-ML chipsets, supporting open automotive connectivity standards and facilitating scalable, multi-vendor vehicle network integration.
Keysight Launches Optical Ethernet Test System for Automotive Use
Keysight Technologies has introduced the AE6980T test solution for validating optical automotive Ethernet transmitters, supporting IEEE 802.3cz standards and enhancing in-vehicle network performance.
OPEN Alliance and AUTOSAR Collaborate on Ethernet Vehicle Networking
OPEN Alliance and AUTOSAR partner to develop standardised Ethernet specifications for automotive networking, focusing on functional safety, cybersecurity, and interoperability to support next-generation vehicle systems.
MIPI A-PHY Standard Enters Mass Production for Automotive SerDes
MIPI Alliance's A-PHY specification has reached mass production, enabling standardised automotive SerDes technology for high-speed sensor and display connectivity in vehicles.
Valens and Samsung partner on next-generation MIPI A-PHY products
Valens Semiconductor and Samsung are partnering to develop next-generation MIPI A-PHY products for high-speed automotive sensor connectivity. Samsung Foundry will fabricate Valens chipsets using its advanced automotive process.
Kodiak Integrates NXP Processors to Enhance Autonomous Vehicles
Kodiak Robotics has incorporated NXP’s automotive processors and interfaces to improve the performance, safety, and reliability of its AI-driven autonomous trucking systems.
Microchip Unveils ASA-ML Camera Development Platform in Japan
Microchip partners with Nippon Chemi-Con and NetVision to launch the first ASA-ML camera system ecosystem, advancing scalable, secure, and interoperable ADAS solutions for Japanese automotive manufacturers.
Nexperia Launches 48 V ESD Protection Diodes for Automotive Networks
Nexperia has introduced AEC-Q101 qualified ESD diodes for 48 V automotive data lines, supporting legacy protocols and ensuring signal integrity in electric and hybrid vehicles.
intoPIX and Lattice launch low-power image compression for automotive vision
intoPIX has made its TicoRAW and JPEG XS compression technologies available on Lattice low-power FPGAs for automotive ADAS and in-vehicle vision systems, reducing bandwidth, power use and latency.
OpenGMSL Association Formed for Automotive Data Transmission
Industry leaders established the OpenGMSL Association to standardise SerDes transmission of video and data, enhancing interoperability and innovation in automotive ADAS, infotainment, and autonomous systems.
Guide on Decoding CANbus Messages for Engineering Applications
This article provides a technical explanation on decoding CANbus messages, detailing the process of translating data packets into readable parameters using the CAN protocol and SAE J1939 standards.
KD to Integrate Optical Transceiver into ZF ProAI ECU
KD and ZF Group collaborate to integrate KD7251 optical transceiver into ZF’s ProAI ECU, enabling IEEE 802.3cz-compliant multigigabit optical vehicle communications.
ADI and Rohde & Schwarz validate 10BASE-T1S automotive Ethernet
Analog Devices and Rohde & Schwarz are using MXO-series oscilloscopes to test and decode ADI’s 10BASE-T1S Ethernet edge-node solution, supporting multi-drop networking and software-defined vehicle architectures.
Nexperia launches flip-chip ESD diodes for automotive high-speed links
Nexperia has launched flip-chip ESD protection diodes for automotive camera links, Ethernet and infotainment interfaces. The devices offer low capacitance, improved bandwidth and automated solder-joint inspection, with initial products in mass production.
Marvell Sells Automotive Ethernet Business to Infineon
Marvell has agreed to sell its automotive ethernet business to Infineon for $2.5 billion, with expected closing in 2025, pending approvals.
ZF Advances Optical Multi-Gigabit Ethernet for Vehicles
ZF has enhanced its high-performance computer to support optical multi-gigabit Ethernet in vehicles, promising improved data transfer speeds and reliability for future automotive applications.
Vector Launches VN5614 Interface for Automotive Ethernet
Vector introduces the VN5614 interface, enhancing Automotive Ethernet 10BASE-T1S applications with advanced testing and monitoring capabilities in compliance with Open Alliance TC10.
NXP Semiconductors Unveils S32K5 Family of Automotive MCUs
NXP's S32K5 automotive microcontrollers aim to enhance software-defined vehicle capabilities with advanced performance, safety, and integration for automotive applications.
Göpel Electronic Introduces Automotive Ethernet Controller
Göpel Electronic has launched an Ethernet controller for testing safety-critical automotive applications, featuring modular interfaces and advanced simulation options.
Comcores Joins OPEN Alliance to Advance Automotive Ethernet
Comcores becomes a member of the OPEN Alliance, aiming to enhance Ethernet communication and security solutions in the automotive sector.
CustomCAN Feature Enhances CANbus Data Extraction
Ruptela's CustomCAN feature enables flexible CANbus data extraction, addressing challenges for diverse vehicle fleets in industries such as logistics and heavy machinery management.
Nexperia Launches ESD Protection Diodes for Automotive Ethernet
Nexperia introduces ESD diodes compliant with OPEN Alliance for automotive Ethernet, enhancing signal integrity and simplifying board designs for manufacturers.
Keysight Expands Automotive Ethernet Rx Compliance Solution
Keysight Technologies enhances its Automotive Ethernet solution to support MultiGBASE-T1, improving validation and compliance testing for advanced automotive networking technologies.
Semtech Introduces New ESD Protection for Automotive Ethernet
Semtech launches the RClamp10022PWQ, a transient voltage suppressor for automotive Ethernet, featuring robust ESD protection and compliance with Open Alliance specifications.
Keysight and KD Collaborate on Automotive Ethernet Testing
Keysight and KD have partnered to enhance multigigabit optical Ethernet testing for automotive applications, aligning with new IEEE standards to improve signal quality assessment.
Rivian details GEN2 zonal electrical architecture at California lab
Rivian’s GEN2 vehicle architecture cuts electronic control units from 17 to seven, removes 1.6 miles of wiring and reduces weight by about 44 pounds. The system moves to zonal control and relies on software advances.
Keysight launches compact automotive network test solution for software-defined vehicles
Keysight has expanded its Novus portfolio with a compact automotive network test platform supporting 10BASE-T1S and multi-gigabit BASE-T1 interfaces. The Novus mini automotive is designed to validate performance and conformance in software-defined vehicle networks.
NXP to acquire Aviva Links for $242.5m
NXP has agreed to acquire in-vehicle connectivity specialist Aviva Links for $242.5 million in cash. The deal adds ASA-compliant SerDes and Ethernet connectivity technology for software-defined vehicle, ADAS and infotainment networks.
Wistron and NXP Collaborate to Establish Joint Laboratory
Wistron and NXP Semiconductors announce a joint lab to enhance E/E architectures for software defined vehicles, leveraging NXP’s automotive solutions and Wistron's integration expertise.
Keysight and ADI Collaborate on GMSL2 Test Standards
Keysight expands its software solutions for GMSL2 testing, enhancing validation and debugging capabilities for automotive applications, fostering quicker market readiness.
NXP Launches S32J Family of Ethernet Switches for Vehicles
NXP introduces the S32J family of Ethernet switches, enhancing vehicle networking through scalable solutions compatible with the CoreRide platform. Availability expected in 2025.
Microchip Launches VelocityDRIVE Software Platform and Switches
Microchip Technology introduces LAN969x Ethernet switches and VelocityDRIVE Software Platform, optimising in-vehicle Ethernet networking with enhanced functionality and safety standards.
