Components News
SearchAutomotive components and supplier developments not covered by a more specific component tag.
Chery recalls 8,878 Omoda 5s in Malaysia over rear axle defect
Chery will inspect and, where necessary, replace rear axle components in 8,878 Omoda 5 vehicles after finding insufficiently strong welds. Malaysia’s Road Transport Department has suspended the model’s type approval, restricting new registrations pending investigation.
Yangwang highlights metal brake pedals after Maextro failures
BYD’s Yangwang brand has showcased all-metal brake pedal assemblies for its U7, U8 and U8L, saying they are designed to withstand 2,500 N—above China’s 2,000 N standard. The brand also cited its e4 platform’s emergency regenerative braking.
Maextro to redesign V800 brake pedal after test failures
After brake pedal brackets fractured during emergency tests of three V800 minivans, Maextro said it would optimise the design, offer existing owners a free upgrade and review validation, testing and production quality controls. The company said the tests exceeded applicable standards and reported no failures in customer use.
Maextro V800 brake pedal failures prompt safety scrutiny in China
Dongchedi reports that brake pedal brackets fractured in emergency braking tests on three low-mileage Huawei-JAC Maextro V800s. With foot braking lost, stopping distance rose from about 38m to 140m; the companies have not issued a formal response.
Chery Omoda 5 loses rear axle in Malaysia incident
A Chery Omoda 5’s rear suspension assembly and both wheels detached in Johor Bahru on 6 October. The cause and whether the vehicle was covered by Malaysia’s 2024 inspection campaign remain unconfirmed; no injuries were reported.
Samsung Texas fab prototypes Tesla’s 2nm AI5 chip
Samsung’s Taylor, Texas fab has reportedly begun prototyping Tesla’s 2nm AI5 chip for Full Self-Driving vehicles, the Optimus robot and Cybercab robotaxi. Final production verification is targeted by year-end, with supplies expected from 2027.
Melexis launches ASIL B current sensors for high-voltage automotive systems
Melexis has expanded its isolated current-sensor portfolio with MLX91224 and MLX91225 devices for high-voltage automotive applications, including EV powertrains, electric drives, converters and chargers. The sensors support up to 100 ARMS, rapid response and ASIL B safety integration.
Zeekr tests 009 MPV seat foam’s durability under 20-ton truck
Zeekr says its layered 009 MPV seat foam retained its structure and vibration-damping performance after being driven over by nine passenger cars and a 20-ton Farizon heavy-duty truck.
Tariffs and higher costs squeeze US automotive suppliers
Tariffs, fuel prices and higher interest rates are squeezing automotive suppliers. Lucerne International halted US manufacturing and cancelled a planned Michigan plant, while Grupo Antolin cited tariffs, energy costs and supply-chain disruption in its US bankruptcy filing.
ZF LIFETEC integrates occupant sensing with adaptive restraint systems
ZF LIFETEC has developed an integrated passenger-car safety system combining cameras, seat and seat-belt sensors with adaptive airbags and restraint algorithms. The production-ready technology adjusts protection to occupant size, position and posture, and will be demonstrated at InCabin Europe 2026.
Taiwan Semiconductor launches automotive-grade 60V dual power MOSFETs
Taiwan Semiconductor has added automotive-grade 60V dual n-channel MOSFETs to its TQM Series. The PDFN56UD devices offer drop-in compatibility, low resistance and thermal-management features for vehicle motor controls, actuators, solenoid drives and bridge applications.
ZF unveils low-dust MAXX Uniper air disc brake for heavy-duty vehicles
ZF has unveiled its MAXX Uniper air disc brake for heavy-duty commercial vehicles at IAA Transportation 2026. A coated rotor cuts PM10 brake-particle emissions by up to 65%, while the modular design delivers up to 30,000 Nm of torque and easier servicing. Production is expected in 2027.
Volvo updates D13 engine for EPA 2027 emissions rules
Volvo Trucks North America has updated its D13 heavy-truck engine with a high-pressure common-rail system, 48-volt aftertreatment components and a revised turbocharger. Ratings run from 405 to 540 hp, with fuel-economy gains of about 4% claimed for some fleets.
Michelin launches X Multi Energy D2 regional-haul truck tyre
Michelin has launched the X Multi Energy D2 drive tyre for regional-haul trucks, claiming 9% lower rolling resistance than its predecessor. The tyre offers improved worn wet handling and snow traction, a casing rated for up to four retreads, and is available in three sizes.
Kässbohrer modular trailer floor system wins 2027 International Trailer Award
Kässbohrer’s Modular Floor System has won the 2027 International Trailer Award in the Components category. The interchangeable hardwood, steel-grid and rubber modules allow low-loader operators to adapt trailers to different heavy loads, with full floor replacement taking less than three hours.
ZF launches lower-emission TRW braking products for aftermarket
ZF is showcasing TRW DTEC brake pads and discs that achieved up to 80% lower PM10 emissions in brake dynamometer tests, alongside a brake fluid containing 60% post-consumer recycled material. The products are designed to help workshops and fleets prepare for Euro 7.
Mitsubishi launches compact refrigeration units for electric trucks
MHI Thermal Systems has launched the TEU series of under-mounted electric transport refrigeration units for battery-electric trucks. Modular components cut volume by 30%, weight by 55% and installation opening size by 40%, while supporting multiple power sources and multi-temperature cargo.
TI launches multiaxial Hall-effect current sensor for EV traction inverters
Texas Instruments has launched the TMCS2100-Q1, a coreless Hall-effect current sensor for hybrid and electric vehicle traction inverters. Its multiaxial measurement is designed to reduce vibration-induced errors, improve torque control and increase powertrain efficiency.
E-Con Systems gains automotive quality certification for camera portfolio
E-Con Systems has achieved IATF 16949:2016 certification covering its forward-, rear-, surround-view and driver-monitoring cameras. The certification strengthens quality and manufacturing controls as the company develops ISO 26262-compliant cameras for automotive and mobility applications.
Tesla Model Y L owners report recurring rear suspension failures in China
Tesla Model Y L owners in China report rear suspension collapse after extended or loaded driving, causing wheel misalignment, tyre wear and vehicle instability. Tesla is replacing springs under warranty, but some owners say the problem has recurred and lacks a permanent fix.
Tesla raises Model 3 European range to 572 km with lower-resistance tyres
Tesla says updated tyres will lift the European Model 3’s listed WLTP range from 534 km to 572 km without increasing battery capacity. Lower rolling resistance cuts consumption from 13 to 12.2 kWh/100 km.
Hongqi develops perovskite solar sunroof prototype for electric SUV
FAW Hongqi has developed a perovskite photovoltaic sunroof prototype for its EHS7 electric SUV. The 300W system is designed to generate about 400kWh annually, while future body-integrated panels could provide up to 80km of daily driving range.
Melexis becomes direct semiconductor supplier to BYD
Melexis has signed a master purchase agreement making it a direct supplier within BYD’s global procurement ecosystem. The deal covers semiconductor solutions for powertrain, thermal management, lighting, braking, steering and battery applications, strengthening Melexis’ position in China.
Xiaomi unveils 3nm intelligent-driving chip for autonomous systems
Xiaomi has unveiled the Xring D100, China’s first 3nm intelligent-driving chip. The 20-core processor and 16-core NPU are claimed to deliver 700–1,000 TOPS, but the chip still requires automotive certification and validation before deployment in an unspecified model.
US to raise Canadian vehicle and parts tariffs to 50% in 2027
Donald Trump said the US will increase tariffs on Canadian cars, trucks, automotive parts and steel to 50% from 1 January 2027, escalating the trade dispute after negotiations broke down.
KGM Musso EVs sold in Australia lacked two advertised airbags
KGM and ANCAP say Musso EV utes sold in Australia since November 2025 were missing the advertised centre and driver knee airbags. More than 300 vehicles were affected, while KGM has corrected its marketing materials.
Europe’s semiconductor strategy faces capacity, skills and supply-chain constraints
Europe’s semiconductor output is forecast to reach only 8% of global capacity by 2030, well below the EU’s 20% target. A proposed Chips Act 2.0 seeks to strengthen production, but the region faces investment, workforce and raw-material dependencies, despite automotive-focused projects such as ESMC’s Dresden plant.
GM agrees up to $4.5bn parts deal to secure critical components
General Motors has agreed a financing-backed parts procurement arrangement worth up to $4.5bn with Procura Auto Parts, allowing suppliers to be prepaid and helping secure critical components while limiting inventory costs and supply-chain disruption risks.
TDK expands 125 V capacitors for small electric vehicles
TDK is expanding its aluminium electrolytic capacitor ranges with 125 V-rated parts and higher ripple-current capability for compact DC-link banks in small electric vehicles, micromobility platforms and other applications.
China overtakes South Korea in CMOS image sensors as automotive competition grows
Yole’s 2025 CMOS image-sensor landscape finds China has overtaken South Korea as the second-largest supplier. Automotive remains a key battleground, with Omnivision leading and Sony gaining share in high-resolution ADAS and viewing cameras.
Paccar recalls 5,919 heavy trucks over possible electrical fault
Paccar is recalling 5,919 2027 Peterbilt and Kenworth heavy trucks after oil contamination may affect their power distribution centre boxes. Dealers will inspect serial numbers and replace defective units free of charge; no related field reports had been received by 27 July.
Brake Safety Week targets commercial-vehicle drums and rotors
The Commercial Vehicle Safety Alliance will focus its 23–29 August Brake Safety Week inspections in Canada, Mexico and the US on drums and rotors, removing vehicles with serious brake or other violations from service and collecting enforcement data.
Xpeng recalls 33,473 X9 MPVs over air-suspension defect
Xpeng will recall 33,473 X9 MPVs in China from 28 August 2026 after manufacturing defects caused front air-spring leaks in high heat and humidity. The company will replace affected air-spring assemblies free of charge.
ConMet launches TruCast aftermarket brake-drum range
ConMet has launched its TruCast aftermarket brake-drum range, with nine part numbers for heavy-duty truck and trailer applications. The drums are available through the company's North American aftermarket distribution network and meet FMVSS 121 and OEM performance requirements.
Continental launches ContiTread HDL 5 EP commercial-vehicle retread
Continental has launched the ContiTread HDL 5 EP, a long-haul drive retread for commercial fleets. Its five-rib tread, revised compound and 3D sipes are intended to improve fuel efficiency, wear life, traction and uptime.
NextGO Epi raises €2m for gallium oxide wafer production
Berlin-based NextGO Epi has secured €2m pre-seed funding to advance production of industrial-quality gallium oxide epitaxial wafers, has generated initial revenue from international customers and the funding has been earmarked to support development, staffing and commercial expansion.
Foton launches local accessories range for Tunland
Foton Australia has partnered with three local specialists and has developed a genuine accessories range for Tunland V7 and V9, and has provided warranty-supported fitment via its authorised retailer network to simplify fleet configuration and deployment.
Rust-Prevention Strategy for Vocational Fleets
Holman has outlined rust-mitigation practices for vocational fleets in winter climates, and has emphasised specification choices, supplier coating processes and routine inspections to reduce downtime and equipment degradation.
Tesla A15 chip planned for production at Samsung and TSMC fabs
Tesla’s A15 chip is planned for concurrent production on 2nm processes at TSMC in Taiwan and Samsung’s Taylor, Texas facility, with TSMC Arizona and Tesla’s Texas Terafab potentially added later.
REWIRE project advances smart remanufacturing
The Horizon Europe-funded REWIRE project has brought together industry and research partners across three demonstrators to deploy robotics, AI and digital twin technologies, and has established a Triage, Plan, Simulate and Assure framework to improve remanufacturing traceability, compliance and scalability.
Infineon opens largest power semiconductor plant in Dresden
Infineon has opened a €5bn power semiconductor plant in Dresden, has received nearly €920m in European Chips Act funding, has increased regional production capacity and has been expected to double Dresden output and create about 1,000 specialist jobs.
Xiaomi Auto unveils fully recycled alloy for EV chassis
Xiaomi Auto has launched Titan Alloy 2.0, a 100% recycled aluminium structural casting material that has registered 1.1 kgCO₂e/kg (a 93% reduction), has been IVL‑verified and EPD‑registered, and has been projected for a 550,000‑vehicle annual platform.
BYD Ti7 owners in China report detached glass roofs and charging-port leaks
Owners of BYD’s Ti7 EV in China have reported panoramic glass roofs detaching within days of delivery, causing leaks, wind noise and water pooling around the rear charging port. Thirty-one roof-related complaints have been filed, with BYD referring the issue to authorities.
E13 EM gate-drive transformers for xEV platforms
TDK has introduced the E13 EM gate-drive transformers for xEV platforms, which have been qualified to AEC‑Q200 Rev. E and specified for −40 °C to 150 °C, offering compact SMD MnZn designs, 100–400 kHz operation and IEC insulation compliance.
Taiyo Yuden commercialises automotive hybrid capacitors
Taiyo Yuden has commercialised 46 AEC-Q200-qualified hybrid aluminium electrolytic capacitors rated at up to 80V and 135°C for automotive power-supply circuits. Mass production began in June 2026 at its Shirakawa and ELNA Aomori plants in Japan.