Automotive sealants, coatings and adhesives used in vehicle or component manufacturing.
WEVO launches silicone seal for EV battery housings
WEVO has developed WEVOSIL 23130, a liquid silicone rubber for formed-in-place EV battery pack gaskets that has been designed to meet China's tightened GB 38031-2025 safety standard, offering chemical adhesion, fast curing and production-compatible handling.
Henkel Battery Application Centre in Michigan
Henkel has opened a Battery Application Centre in Madison Heights that has replicated production dispensing with six‑axis robotics and heated pump systems, has supported co‑engineering on adhesive and de‑bonding solutions, and has used digital twin modelling for scale‑up.
Thermal adhesives for EV battery cell-to-pack bonding
Manufacturers have advanced thermally conductive adhesives to improve bonding and thermal management in EV battery cell-to-pack and cell-to-plate architectures, enabling higher bond strength, tailored reworkability, and reduced thermal resistance through thinner bondlines.
Hoenle launches UV-curable gasket Vitralit CIPG 60200
Hoenle has introduced Vitralit CIPG 60200, a UV‑curable cured‑in‑place gasket for automotive electronics, which has been designed for rapid UV curing, compatibility with −40 °C to above 150 °C, resistance to common automotive fluids and reusability after disassembly.
Henkel introduces LOCTITE SOLVE virtual adhesives hub
Henkel has introduced LOCTITE SOLVE, an AI-powered virtual materials hub, and has demonstrated that OEM and battery engineers have been able to access material data cards, generate virtual formulations via the Henkel Datacube, and optimise development cycles.
Henkel Doubles Production Facility in South Dakota for EV Sector
Henkel expanded its South Dakota facility to 70,000 sq ft, enhancing production of thermal management materials for EV and electronics markets with a $30 million investment.
H.B. Fuller Introduces Cost-Efficient Thermal Dielectric Coating
H.B. Fuller has developed a UV-curable thermal dielectric coating that enhances insulation, flame retardancy, and abrasion resistance while improving manufacturing efficiency in battery production.
Battery Pack Safety: Potting Materials and Thermal Runaway Prevention
The evolving e-mobility sector emphasises battery safety through advanced potting materials and design integration, balancing thermal management, mechanical protection, and manufacturing consistency.
Advanced Adhesive Enhances Efficiency in Battery Enclosure Production
H.B. Fuller's EV Bond 775 adhesive improves battery enclosure manufacturing by reducing cycle times and scrap rates, enhancing thermal and electrical insulation integration, and supporting scalable production.
Advancements in Thermal Adhesives for EV Battery Packs
This webinar explores recent developments in thermal adhesives enhancing bonding strength, thermal management, and manufacturing efficiency for electric vehicle battery pack designs.
DuPont Showcases Multi-Material Solutions for EV Battery Assembly
DuPont presented advanced multi-material solutions for EV battery packs at The Battery Show Europe 2025, emphasising thermal management, sustainability, and manufacturing efficiency.
ENNOVI Launches Busbar Sealing Tech for EV and Hybrid Drivetrains
ENNOVI introduces SealTech, a busbar sealing solution for EV and hybrid drivetrains that improves manufacturing efficiency and design flexibility while preventing coolant leakage.
Parker launches TC-850 adhesive for EV battery packs
Parker Hannifin introduces CoolTherm TC-850, a thermally conductive structural adhesive designed to improve thermal management and assembly efficiency in electric vehicle battery packs.
Hutchinson develops sealing materials for electric-vehicle applications
Hutchinson has developed fire-resistant EPDM compound 7EP3328 for battery and cooling-circuit applications, alongside recycled and bio-based sealing materials designed to support vehicle electrification.
Freudenberg Launches New Elastomer for Battery Sealing
Freudenberg Sealing Technologies introduces an injection-moulded elastomer for automotive battery cells, enhancing sealing performance while complying with environmental regulations and ensuring battery longevity.
Wevo-Chemie Launches New Silicones for Automotive Electronics
Wevo-Chemie has unveiled WEVOSIL silicone compounds designed for automotive power electronics, enhancing reliability and thermal conductivity for electric drivetrains.
Wevo-Chemie Launches Optimised Silicone Thermal Gap Filler
Wevo-Chemie introduces WEVOSIL 26040 FL, a silicone gap filler designed for enhanced heat dissipation in power electronics and battery applications.
Sika's Innovations in Battery Storage Technologies
Sika focuses on advancing battery storage technologies, supporting sustainable energy solutions for electric vehicles, wind, and solar sectors through innovative materials and expert services.
Innovations in Battery Pack Solutions by PPG for EVs
PPG focuses on advanced materials for electric vehicle battery packs, addressing performance, safety, and durability challenges while fostering customer collaboration for innovation.
DuPont Advances EV Battery Durability and Performance Solutions
DuPont introduces new adhesives and materials aimed at enhancing the structural integrity, thermal management, and efficiency of electric vehicle battery systems.
Hönle and bdtronic Develop Inline Curing Process for Sealants
Hönle and bdtronic have established a five-step process for curing liquid sealants in battery cell module controllers, catering to high production requirements.
PPG Sealer Technology Offers Energy Savings for Stellantis
PPG's CORASEAL® 4-Wet Sealer reduces energy consumption and CO₂ emissions in Stellantis' production, streamlining the curing process for automotive OEM paint shops.
Avery Dennison Innovates EV Battery Safety with Advanced Adhesive Solutions
Avery Dennison's new adhesive tapes for EV batteries provide electrical insulation and corrosion resistance, enhancing safety and performance in electric vehicles.
H.B. Fuller Acquires ND Industries Inc.
H.B. Fuller Company has completed the acquisition of ND Industries Inc., enhancing its adhesive product portfolio and market presence in high-margin segments within the CASE industry.
Henkel Introduces New Automotive Potting Solutions for Electronic Components' Performance Enhancement
Henkel introduces three new potting adhesives tailored for automotive applications, providing protection for sensitive electronic components. The innovative solutions offer compatibility, efficiency, and durability for manufacturers.
GROB Implements DELO Adhesives for EV Motor Assembly Machinery
US-based GROB partners with Germany's DELO Industrial Adhesives to optimize EV motor assembly machinery, utilizing dual-curing adhesives for efficiency in rotor manufacturing processes.
Atlas Copco develops single-drop sealing method for EV batteries
Atlas Copco’s Industrial Assembly Solution division has developed an intelligent single-drop application for sealing electric-vehicle batteries, improving corrosion protection, automation, precision, productivity and material efficiency.
Atlas Copco Expands Innovation Centre in Bretten, Germany
Atlas Copco has opened an expanded innovation centre in Germany, enhancing capacity for advanced joining technologies to meet increasing customer demand across various industries.
Atlas Copco Acquires Bondtech to Enhance Automotive Solutions
Atlas Copco has agreed to acquire Bondtech, enhancing its offerings in adhesive dispensing for the automotive sector, with the deal expected to complete in Q2.
Atlas Copco Expands German Facility to Meet Demand
Atlas Copco will expand its SCA facility in Germany to accommodate increased demand for innovative assembly solutions, enhancing customer testing and training capabilities.