A relevant industry webinar announcement, recording or substantive webinar-derived report.
Blink Charging webinar outlines fleet electrification deployment strategies
Blink Charging will host a webinar on fleet electrification, covering charging-infrastructure planning, site assessments, duty-cycle considerations, utility coordination, costs and phased deployment.
Saucon expands 2026 webinar series for motorcoach and fleet operators
Saucon is running an expert-led webinar series on motorcoach and fleet operations, covering telematics-based driver performance, safety investigations, hours of service and marketing applications. Further sessions are scheduled throughout 2026.
Webinar examines high-temperature film for 800V+ SiC inverters
Advanced Conversion and Peak Nano will discuss NanoPlex LDF dielectric film for high-temperature 800V+ SiC inverter DC-link applications, including its performance characteristics, integration with Power Ring architecture and ongoing testing.
C-ITS Deployment for Public Transport in Europe
The webinar has presented operational C-ITS deployments across Germany, Czechia and Austria, has highlighted measurable benefits in travel times, timetable stability and safety, and has identified interoperability and integration as ongoing challenges.
Webinar highlights digital tools for modern pavement management
An International Road Federation webinar examined non-contact road scanning, smartphone-based roughness monitoring and digital twins to help authorities collect consistent pavement data, improve safety and optimise maintenance decisions.
Saucon to host 2026 webinar series on motorcoach fleet operations
Saucon is expanding its 2026 webinar programme for passenger-transport and fleet operators, covering telematics-based driver performance, safety management, compliance and operational efficiency.
Fujipoly webinar to explore reducing thermal-interface material waste
Fujipoly will discuss initiatives to reuse thermal-interface material by-products and offcuts, aiming to reduce waste and support circular manufacturing in EV engineering.
Functional Safety in eMobility Battery Systems
A webinar has been organised by Intertek to compare common eMobility battery and product standards and has outlined methods to implement application-specific functional safety test plans, covering battery safety functions, tests and EMC evaluations for EV engineering stakeholders.
Webinar on accelerating BMS development and validation
A webinar has presented a compliance‑aware approach to accelerate battery management system development and validation while maintaining requirements alignment, testing and traceability, addressing risks associated with compressed schedules.
Webinar: CoolSiC Power Devices for xEV Power Conversion
Infineon has presented a webinar at the Virtual Conference on EV Engineering that has outlined new CoolSiC AEC-Q qualified power devices and single-stage onboard charger topologies for xEV power conversion.
Webinar: VIO rack measurement system
Vector Informatik has scheduled a webinar presenting the VIO rack system, which has offered up to 12 configurable slots and integration with vMeasure to enable high-channel calibration and analogue measurements for EV engineering.
Webinar on modelling hydrogen fuel cells and electrolysers
COMSOL has announced a webinar at the Virtual Conference on EV Engineering that has presented four examples of using COMSOL Multiphysics to model electrolysers and fuel cells, and has included a live demonstration of model setup, solution and results analysis.
Resettable high-voltage fault protection for EVs
Sensata Technologies has presented a webinar comparing conventional fuse‑contactor designs with a combined resettable protection approach and has provided validation data and a specification framework for high‑voltage EV fault management.
AVL webinar on battery design for new safety standards
China has updated EV battery safety standards, and AVL has developed a 'No Flame-Out' pack design using multi-scale simulation, empirical testing and analytics; a webinar has been scheduled for the Virtual Conference on EV Engineering.
Webinar: CoolGaN 100 V G1 for automotive power electronics
Infineon has presented a webinar at the March Virtual Conference on EV Engineering on CoolGaN Automotive Transistor 100 V G1, and has outlined GaN fundamentals, applications in on‑board chargers, DC‑DC converters and traction inverters, and efficiency and cost benefits.
Megawatt charging and communications testing
dSPACE has presented a webinar at its Virtual Conference on EV Engineering and has demonstrated a complete megawatt charging process and has outlined testing approaches for ISO 15118‑20 and 10BASE‑T1S communications for high‑power commercial vehicle charging.
Webinar highlights inclusive mobility and AI-enabled road safety
An International Road Federation webinar examined rural accessibility, workforce inclusion and safer mobility. Projects included Guatemala’s rural access programme, a Rwanda bridge study and an AI-enabled intelligent transport deployment in Oman detecting unsafe driving.
Webinar: Measuring shield currents in HV EV cables
Vector has announced a webinar that has described the HV BM 1.2+S, which has measured inner conductor and shield currents at 1 MHz via EtherCAT and has been presented as suited to harsh environments.
Webinar on resettable circuit protection for EVs
Eaton has announced a March 2026 webinar that has presented Breaktor, a resettable single‑pole high‑voltage circuit protection device that has been designed to reduce disposable components, downtime and total cost of ownership in electric vehicles.
KEYSTONE demonstrates smart enforcement web app to transport stakeholders
KEYSTONE partners demonstrated a smart enforcement web app linking road police, port authorities and drivers. Pilots in road and intermodal transport showed reduced manual checks, faster processes and improved data traceability through interoperable systems.
Webinar on modelling hydrogen fuel cells and electrolysers
A webinar has been scheduled for 11 March 2026 to demonstrate COMSOL Multiphysics modelling of electrolyser and fuel cell designs, presenting four case studies, live setup demonstrations and methods for performance optimisation under defined operating conditions.
Webinar: Isolating EV charging interoperability faults
A webinar has outlined a structured approach to isolating EV‑charging interoperability failures, emphasising separation of EV, EVSE and communications errors and reduced troubleshooting time without on‑site appointments or raw hex dumps.
Webinar on e-mobility battery pack materials and testing
The webinar has examined material and design approaches for e-mobility battery packs, highlighting non-cellular elastomer potting versus foam, and has assessed implications for safety, durability, manufacturability and production efficiency.
Henkel introduces LOCTITE SOLVE virtual adhesives hub
Henkel has introduced LOCTITE SOLVE, an AI-powered virtual materials hub, and has demonstrated that OEM and battery engineers have been able to access material data cards, generate virtual formulations via the Henkel Datacube, and optimise development cycles.
Mitigating catastrophic failure risk in EV battery cells
A webinar has been organised by Chroma to outline methods for identifying and removing defective lithium‑ion cells before electrolyte introduction, after reports have indicated Hipot and IR tests have failed to detect latent internal shorts.
Electrified Mobile Hydraulics: Integration and Controls
Webinar on electrified mobile hydraulics covering subsystems integration, control strategies, voltage selection, regeneration and safety, with guidance to assess architectures, quantify savings and support ROI decisions.
Webinar on EV thermal management using PCMs
Webinar examines phase change materials for thermal management in EV electronics, covering performance, reliability, design impacts and potential effects on power density, production costs and time to market.
Webinar on V2X Tolling Technology and Industry Impacts
TTi and Kapsch TrafficCom will host a 4 December 2025 webinar on V2X tolling, convening industry stakeholders to discuss deployment challenges, financial sustainability, and lessons from North Carolina's pilot.
IRF launches webinar series on greener, resilient road infrastructure
The International Road Federation has launched its Circle of Excellence webinar series with a session examining innovation, policy and practical measures for greener, more climate-resilient roads, including smarter systems, predictive tools and sustainable operations.
KEYSTONE webinar reports digital transport-control pilot progress
A KEYSTONE webinar reviewed digital transport-control pilots linking logistics platforms, port authorities and enforcement bodies. The initiatives demonstrated real-time vehicle and freight data sharing, automated ETA exchange and digital eCMR documentation to improve interoperability and transport efficiency.
Hi-Drive webinar details testing to extend automated-driving operating domains
The Hi-Drive project has conducted more than 120 automated-driving experiments across Europe, testing vehicle-to-everything communication, positioning, cybersecurity and machine learning in varied road, traffic and weather conditions.
Webinar on Vehicle Theft Prevention and Recovery Solutions
3Dtracking and Naturelink will present a webinar demonstrating integrated hardware and software solutions for vehicle theft prevention and recovery to support fleet management providers.
Innovations in Twin-Screw Extrusion for Battery Manufacturing
Twin-screw extrusion is enhancing battery manufacturing by improving electrode quality and enabling continuous, solvent-less processing, fostering efficiency in material formulation and production.
Industrial CT Scanning Enhances EV Battery Reliability
This webinar explores industrial CT scanning as a non-destructive method to detect internal defects and assess structural impacts in electric vehicle batteries, supporting improved safety and quality control.
Webinar on Effective EV Fleet Depot Charging Strategies
Logistics Manager and Mer UK will present a free webinar addressing practical approaches to depot EV charging management, focusing on power limitations, operational needs, and cost optimisation.
Webinar to explore EU-funded digital road transport projects
A 29 October 2025 webinar will examine digital technologies, standards and pilots from the KEYSTONE, SETO and HOLOGISTICS projects, covering smart enforcement, secure logistics data exchange, digital infrastructure and zero-emission freight across Europe.
Webinar on Near-Miss Event Identification for Road Safety
TTi and Miovision host a webinar on using continuous safety monitoring to identify near-miss road events, aiming to enhance proactive road safety measures and support Vision Zero objectives.
Charged hosts virtual conference on EV engineering
Charged is hosting a free virtual EV engineering conference featuring live and recorded sessions on charging, batteries, busbar production, inverters, thermal adhesives and related manufacturing technologies.
Charged EVs schedules virtual conference on EV engineering
Charged EVs is hosting a free virtual EV engineering conference on 17 September 2025, featuring live and recorded webinars on power electronics, chargers, inverters, battery-pack testing, connectivity, motors and thermal materials.
Webinar on EU Battery Regulations for Electric Vehicles
Intertek hosts a webinar detailing EU battery regulations for EV manufacturers, importers, and distributors, covering CE marking, Notified Bodies, timelines, and compliance guidance.
Webinar on Residue-Free Pastes in Vacuum Soldering Equipment
A webinar by PINK GmbH will examine residue-free pastes' properties and vacuum reflow solutions, highlighting cost savings and handling requirements in soldering processes.
Kapsch TrafficCom and Comillas University Webinar on Urban Mobility
Kapsch TrafficCom and Comillas University held a webinar addressing urban congestion and smart city mobility, highlighting pricing strategies and collaborative research for sustainable transport solutions.
Webinar on Advanced Tooling for Differential Cable Termination
TE Connectivity hosts a webinar on improving data connectivity through efficient, flexible tooling and quality inspection for enhanced production and next-generation cable termination standards.
Webinar on Automotive Connectivity Solutions by TTI and Molex
TTI and Molex present a webinar on connectors for non-safety-critical automotive modules, focusing on compact, reliable solutions for lighting, HUDs, and infotainment systems.
Webinar on Future EV Testing Trends in 2026
NI, now part of Emerson, hosts a webinar on upcoming EV testing methodologies and preparation strategies addressing modular power electronics and connected workflows.
